Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Coral Springs, FL
We provide independent Lennox service across Coral Springs, and we’re clear about what that means: we’re not affiliated with or authorized by Lennox. What sets our Lennox work here apart is the ductwork we find it connected to – original flex runs and fiberglass duct board from the 1970s through 1990s, now at end of life, so cleaning a Lennox system in Coral Springs often turns into a repair conversation the same visit. We run professional-grade Rotobrush and Nikro equipment, use Abatement Technologies gear for contaminant capture, and set one flat price per system before any work starts. Call (844) 761-5395 for a free estimate.
Why Coral Springs Residents Choose Us for Lennox Service
Our technicians have up to 10 years of experience working on Lennox residential equipment, from the Merit Series (14ACX, ML14XC1) and Elite Series (XC13, XC21) through the Dave Lennox Signature Collection (SL280, SLP98) and Lennox air handlers (CBA, CBX). That matters in Coral Springs because the equipment and the ducts here are both getting old, and the two interact. We know how a variable-speed Lennox air handler behaves when its return-side duct board has gone soft, and we know when a sagging flex run is starving the coil.
You get quality parts that fit your Lennox equipment: OEM parts for blower motors, control boards and coil assemblies where available, and quality aftermarket flex duct, mastic and insulation for duct repairs. We repair what others just clean around. Scheduling is straightforward, the estimate is free, and the price is set per system in writing before we start. We also work with Honeywell and Aprilaire air-quality systems, so we understand how clean ducts interact with your whole-home filtration and humidity control – your whole system, not just your vents. Coral Springs homeowners deal with enough coupon mailers. We’d rather show you before-and-after photos of your own ducts.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Coral Springs
- Lennox air handlers pulling fiberglass into the coil. PSC and variable-speed blowers in Lennox air handlers will draw loose fiberglass from degrading duct board straight into the evaporator coil. In 1980s and 1990s Coral Springs tract homes, that duct board is often exactly that age. The result is restricted airflow and coil icing that cleaning the vents alone won’t touch.
- Flex duct separating at the Lennox supply plenum. Original flex runs connected to Lennox supply plenums sag, tear, or pull loose at the collar after 20+ years of attic heat and humidity. Conditioned air dumps into the attic and your run times climb. Sealing the connection is part of the job, not an upsell.
- Musty return-side duct board during the rainy season. Coral Springs’s humid subtropical climate keeps the AC running almost year-round, so ducts stay moist inside. Return-side duct board in Lennox systems develops mold and mildew, especially May through October. You usually smell it at the supply registers before you see anything.
- Fouled Lennox evaporator coils. Debris and biological growth collect on the coil, and downstream duct cleaning won’t fix it. Restoring airflow means coil cleaning and blower cleaning as well, which we handle on the same visit.
- Open duct ends near soffit vents. In older Coral Springs neighborhoods, torn flex near soffit vents leaves open duct ends where debris and pest nesting collect. Dense tree canopy and aging infrastructure make it a pattern here. We video-inspect the runs so you see what we find.
Lennox Service in Coral Springs: What Local Conditions Mean for Your Equipment
Coral Springs was built out mostly between the 1970s and 1990s, which shapes every Lennox job here. Most Lennox systems in the city are connected to original flex-duct and fiberglass duct-board runs now at end of life, so cleaning frequently uncovers duct repair needs that newer Broward cities simply don’t see. In a typical Coral Springs Lennox system from the 1980s or 1990s, the original attic flex has sagged, torn at a collar, or pulled loose near a soffit vent, and debris or pest nesting has found its way into the open duct end. A qualified local pro will video-inspect the runs, clean the full system, then repair or replace the damaged flex sections and seal the plenum connections – cleaning without fixing the breaches just lets the problem return. In neighborhoods like Eagle Trace you’ll find newer construction, but across most of Coral Springs the housing stock is aging suburban tract homes with accessible attics, and the Lennox equipment in them is working against ducts that were installed with the house.
Lennox Models & Products We Service in Coral Springs
We service the full range of Lennox residential equipment in Coral Springs: air conditioners and heat pumps from the Merit Series (14ACX, ML14XC1) and Elite Series (XC13, XC21), furnaces from the Dave Lennox Signature Collection (SL280, SLP98), and Lennox air handlers (CBA, CBX). We’re an independent shop, so we’re not limited to a single parts pipeline. For blower motors, control boards and coil assemblies we use OEM Lennox parts where they’re available; for duct repairs we use quality aftermarket flex duct, mastic and insulation that fits the system properly. Repair is usually the right call on Lennox equipment under 15 years old. Systems with cracked heat exchangers or failed compressors in aging Coral Springs homes are often better replaced than rebuilt, and we’ll tell you plainly which situation you’re in.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Coral Springs
Pricing is per job, set by a written estimate, and the estimate is free. Whole-system air duct cleaning typically runs $350 to $700 for a Coral Springs home, with larger or multi-zone systems above that. Flex duct repair is estimated per run once we’ve seen the damage, and evaporator coil cleaning is priced as its own line because it’s separate work from duct cleaning. What drives cost here: how many runs the system has, whether the original flex and duct board can be cleaned or need replacing, how accessible the attic is, and whether we find mold on the return side.
Your free estimate includes a walkthrough, a look at the attic runs, and photos of what we find, so the number you get is the number you pay. No per-vent pricing, no coupon that grows on site. Call (844) 761-5395 for an exact quote.
Serving Coral Springs, FL – Our Local Coverage Area
We serve Coral Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Coral Springs
Cleaning usually makes sense first, but expect it to come with repair. Original flex from that era has often sagged or torn at the collar, so we video-inspect and tell you which sections can be cleaned and which need replacing. Replacing every run isn’t usually necessary. Call (844) 761-5395 to book an inspection and free estimate.
The musty smell usually comes from mold and mildew on return-side duct board, not from the Lennox equipment itself. Coral Springs’s humid subtropical climate keeps the AC running almost year-round, so ducts stay moist inside, and May through October is when it’s worst. Cleaning and sanitizing the system addresses it.
Lennox air handlers with PSC or variable-speed blowers are vulnerable to coil icing when the ductwork is restricted, because the blower pulls loose fiberglass and debris straight into the evaporator coil. The equipment isn’t the problem; the aging duct board feeding it is. Coil and blower cleaning restores airflow.
Every three to five years is a reasonable interval for most Coral Springs homes, and sooner after hurricane-season humidity intrusion, water damage, or a renovation. Homes with original 1970s-1990s flex and duct board often need the inspection more often because the duct material itself is aging. Call (844) 761-5395 and we’ll talk through your system.
Yes. We’re an independent Lennox service provider, not manufacturer-affiliated or authorized, and routine cleaning and duct repair don’t void a manufacturer warranty. We document what we do with before-and-after photos, which is useful if warranty questions ever come up. Call (844) 761-5395 for details.
Service Areas Near Coral Springs
We provide independent Lennox air duct cleaning and duct repair in Coral Springs and the surrounding area, including Margate, Lauderhill, Parkland, Tamarac, Seminole Manor and San Castle.
Book Your Lennox Service in Coral Springs Today
If your Lennox system is pushing dust, running long, or smelling musty, start with a free estimate. Call (844) 761-5395. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system, agreed before work starts, with before-and-after photos of your own ducts.
Written by the team at Harborview Air Duct Cleaning.